LUFFING JIB TOWER CRANE LH650-50
Roll over image to zoom in
Parameter Spec Notes / Source
Maximum Hoisting Capacity 64 t
Maximum Jib (Boom) Length ~ 65 m
Maximum Free-Standing Height ~ 78.25 m
Maximum Tip Load (at full radius) ~ 14.5 t
Control System R-generation electric control with features: load & speed synchronous hoisting, zero-speed hover, remote upgrade, etc.
Service Life Design 30 years equivalent
Safety Features Anti-overload, Anti-collision, Anchor-item detection, Anti-typhoon
Zoomlion Products
Site Adaptation Improved installation/climbing efficiency, reduced transport vehicles
Good for limited swing / urban dense sites Because of the luffing-jib design (General crane knowledge)
Additional Notes / Considerations
The “free-standing height” figure of ~78.25 m is likely for the base configuration; if the tower is anchored or tied in (via building), the working height can be much higher.
The “tip-load” (14.5 t at full radius) highlights that as the jib extends out to full reach, the capacity drops—so load charts are important to check for your working radius.
Because luffing-jib cranes often have higher installation/erection complexity (due to the luffing mechanism, additional winches/hoists) ensure your site logistics (foundation, transport, crane age, spare parts, service) are planned.
Ensure local supply of parts, service for the R-generation electrical control, and local training of operators (especially given the advanced features).
Foundation and ground bearing capacity must be verified for the tower, especially at tall heights and large lifts.
Wind / weather conditions at height are significant — make sure to understand the crane’s approved wind-speed limits and tie-in design if used in tall buildings.
The L1600-64 is built to meet the demands of large-scale construction projects where both lifting capacity and site constraints matter.
With its 64-ton max hoisting capacity, it can handle substantial loads—structural modules, heavy prefabricated panels, large equipment lifts.
The luffing-jib design gives it a major advantage in tight or congested sites: rather than a long horizontal jib with a large swing, the luffing jib adjusts angle up/down, helping reduce the swing radius and avoiding oversail beyond site boundaries.
The boom length of up to ~65 m combined with a tip-load rating (approx 14.5 t at full radius) gives it both reach and lifting capability.
A freestanding height of ~78.25 m (in one spec) means it can be used for relatively tall builds without immediate anchoring.
The machine uses ZOOMLION’s “R-generation” electric control system: features such as load + speed synchronous control, zero-speed hover, rotary inching, remote upgrade of controller/display, anti-collision, wind-indicator, face-recognition and optional wireless remote control.
The structure emphasises transportation, installation and climbing economy: designed with a “30 year equivalent service life,” high safety level (anti-typhoon, anchor-detection, anti-overload) and modular design for lower cost and faster erection.
In summary: If you are planning a project where heavy lifts are required at height, but you are constrained in site footprint (e.g., adjacent buildings, limited swing space, dense urban environment), the L1600-64 offers a solid combination of capacity, reach and site-friendly design.
-
-
₦45,000,000.00Zoomlion ZL105 Crawler Rice Combine Harvester
₦45,000,000.00 -
₦28,000,000.00
₦30,000,000.007% offLOVOL 75HPTRACTOR
₦28,000,000.00₦30,000,000.007% off
Reviews
There are no reviews yet.